我们生活中不能没有快餐店和一下餐厅，但是现在的各地餐饮都会有一些影响。一些餐厅相继关门整顿。那为什么关门整顿呢？首先是一些地方的整体规划，再就是餐饮店的环保手续和餐饮环保设施的安装及维护不到位。那很多的餐饮公司就想问哪里的油烟净化器能达标？油烟净化器的维护怎么维护。

We can't live without fast food restaurants and restaurants, but today's restaurants have some impact. Some restaurants have been closed. Why is the door closed? The first is the overall planning of some places, and then the environmental protection procedures of restaurants and the installation and maintenance of environmental protection facilities are not in place. A lot of food and beverage companies want to ask where the lampblack purifier can reach the standard? How to maintain the maintenance of lampblack purifier.

油烟净化器的达标得根据环保法和当地的要求去选择油烟净化器。一般地方不会去指定排放量达标标准，只要油烟净化器有环保手续基本没问题。

Lampblack purifier standard, according to the environmental protection law and local requirements to choose lampblack purifier. General places will not specify the emission standards, as long as there is no smoke purifier environmental protection procedures.

油烟净化器的维护分为两种：1.预处理网清洗：

The maintenance of lampblack purifier is divided into two kinds: 1. pretreatment net cleaning:

（1）切断电源，打开检修门。

(1) cut off the power supply, open the overhaul door.

（2）将预处理网拉出。

(2) pull out the pretreatment net.

（3）放入清洗槽中浸泡十分钟，轻轻将网上油污清洗干净，并用清水彻底冲洗干净。

(3) soak in the cleaning tank for ten minutes, clean the oil on the net lightly, and rinse thoroughly with clean water.

（4）将清洗后预处理网自然风干。

(4) the pretreatment net will be dried naturally.

（5）将干燥的预处理网按原位置放回油烟分离器

(5) put the drying pretreatment net back to the oil fume separator according to the original position

2.电场清洗：

2. electric field cleaning:

（1）切断电源，打开检修门，取出电场。

(1) cut off the power supply, open the overhaul door and take out the electric field.

（2）用清洁片（塑料片）放在电极板中间，贴着电极板由上向下移动，只需将电极板上大部分油污清理掉即可，一次清理不干净，可以多次清理。

(2) the cleaning piece (plastic sheet) is placed in the middle of the electrode plate, and the electrode plate is moved up and down, so that most of the oil on the electrode plate can be cleaned out. Once cleaning is not clean, it can be cleaned several times.

（3）清理干净刮下的油污，用清水洗干净。

(3) clean and scrape the oil, clean it with water.

（4）清洗过的电场自然风干（如仍有少量油污，不会影响产品过滤效果）。

(4) the cleaned electric field will naturally dry (if there is still a small amount of oil pollution, it will not affect the filtration effect of the product).

（5）将干燥的电场按原位置放回油烟分离器，关上检修门便可以重新工作。

(5) put the dry electric field back to the oil smoke separator according to the original position, and then turn off the door to work again.